technical data sheet 1 / 4 straight jack receptacle for pcb r210.408.012 smt type - gold 0.2 - reel of 100 series : mmt issue : 0325 a in the effort to improve our products, we reserve the right to make changes judged to be necessary. all dimensions are in mm. .. pn ao components body center contact outer contact insulator gasket others parts - - materials phosphor bronze brass phosphor bronze ptfe - - - - platings ( m ) gold 0.2 over nickel 2 gold 0.2 over nickel 2 gold 0.2 over nickel 2 - - -
technical data sheet 2 / 4 straight jack receptacle for pcb r210.408.012 smt type - gold 0.2 - reel of 100 series : mmt issue : 0325 a in the effort to improve our products, we reserve the right to make changes judged to be necessary. packaging specification s tandard u nit o ther 1 00 ? w? option c ontact us electrical characteristics environmental i mpedance 5 0 ? o perating temperature - 55/+100 c f requency 0 -8 g hz h ermetic seal n a a tm.cm3/s v swr 1 .10 + 0 .050 x f( g hz) maxi p anel leakage n a i nsertion loss 0 .20 f ( g hz) db maxi r f leakage - ( n a - f(ghz)) db maxi v oltage rating 1 70 v eff maxi d ielectric withstanding voltage 5 00 v eff mini insulation resistance 5000 m ? mini others characteristics assembly instruction o thers : accouplt : 18nmax / desacc. : 7nmin mechanical characteristics c enter contact retention axial force ? mating end n a n mini axial force ? opposite end n a n mini torque n a n.cm mini r ecommended torque mating n a n.cm panel nut n a n.cm m ating life 5 00 c ycles mini w eight 0 .100 g
technical data sheet 3 / 4 straight jack receptacle for pcb r210.408.012 smt type - gold 0.2 - reel of 100 series : mmt issue : 0325 a in the effort to improve our products, we reserve the right to make changes judged to be necessary.
technical data sheet 4 / 4 straight jack receptacle for pcb r210.408.012 smt type - gold 0.2 - reel of 100 series : mmt issue : 0325 a in the effort to improve our products, we reserve the right to make changes judged to be necessary. parmeter value unit temperature rising area 1 - 4 c/sec max peak temperature 260 c max dwell time @260c 10 sec min dwell time @235c 20 sec max dwell time @235c 60 sec temperature drop in cooling area -1 to - 4 c/sec max dwell time above 100c 420 sec solder procedure of mmt receptacle in industrial environment 1 ? deposition of solder paste sn ag4 cu0.5 on mounting zone by screen printing application. we recommend a low residue solid flux. we advise a thickness of 200 microns (7.800 microinches). verify that the edges of the prined zone are clean. 2 ? placement of the receptacle on the mounting zone with an automatic machine of ? pick and place ? type. a video camera is recommanded for positioning of the component. (see page 3) adhesive agents must not be used on the receptacle. 3 ? soldering by infra-red reflow. below, please find the typical profile to use. 4 ? cleaning of printed circuit boards 5 ? verification of solder joints and position of the component by visual inspection note : the mmt receptacle and the mmt plug must not be mated before completion of this procedure.
|
